esphome:
  name: z1
  friendly_name: z1

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "6BypFn6vausn/yYzIgtjCKu0FHPEi4VLa912F22UXCA="

ota:
  - platform: esphome
    password: "e32c25bb18c69932bd20375b251e1e25"

wifi:
  ssid: "KinCony"
  password: "a12345678"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Z1 Fallback Hotspot"
    password: "CLPH8mbzmyoj"

captive_portal:

remote_receiver:
  pin: 1
  rmt_channel: 4  
  dump: all

remote_transmitter:
  - id: ir47
    pin: 47
    carrier_duty_percent: 50%
  - id: ir48
    pin: 48
    carrier_duty_percent: 50%

switch:
  - platform: template
    name: IR-Send1
    turn_on_action:
      - remote_transmitter.transmit_panasonic:
          transmitter_id: ir47
          address: 0x4004
          command: 0x8140DFA2

  - platform: template
    name: IR-Send2
    turn_on_action:
      - remote_transmitter.transmit_panasonic:
          transmitter_id: ir48
          address: 0x4004
          command: 0x8140DFA2

  - platform: gpio
    name: "led"
    pin: 44
    inverted: False

binary_sensor:
  - platform: gpio
    name: "IO0"
    pin: 
      number: 0
      inverted: true
      mode:
        input: true
        pullup: true
  - platform: gpio
    name: "IO43"
    pin: 
      number: 43
      inverted: true
      mode:
        input: true
        pullup: true

web_server:
  port: 80