Energy Loxone Protocol
=======================

Overview
--------
This document describes the Loxone string protocol for Energy module.
Default delimiter is comma (,). Chip ID: 1-6, Channel: 1-10.


Commands
--------

1. GET_ENERGY_CURRENT - Get current (A) for specific channel
   Request:  RELAY-GET_ENERGY_CURRENT-255,{chip},{channel}
   Response: RELAY-GET_ENERGY_CURRENT-255,{chip},{channel},{value},OK
   Example:
     Request:  RELAY-GET_ENERGY_CURRENT-255,1,1
     Response: RELAY-GET_ENERGY_CURRENT-255,1,1,2.350,OK

2. GET_ENERGY_POWER - Get power (W) for specific channel
   Request:  RELAY-GET_ENERGY_POWER-255,{chip},{channel}
   Response: RELAY-GET_ENERGY_POWER-255,{chip},{channel},{value},OK
   Example:
     Request:  RELAY-GET_ENERGY_POWER-255,1,1
     Response: RELAY-GET_ENERGY_POWER-255,1,1,512.5,OK

3. GET_ENERGY_KWH - Get energy (kWh) for specific channel
   Request:  RELAY-GET_ENERGY_KWH-255,{chip},{channel}
   Response: RELAY-GET_ENERGY_KWH-255,{chip},{channel},{value},OK
   Example:
     Request:  RELAY-GET_ENERGY_KWH-255,1,1
     Response: RELAY-GET_ENERGY_KWH-255,1,1,1250,OK

4. GET_ENERGY_VOLT - Get voltage (V) for chip
   Request:  RELAY-GET_ENERGY_VOLT-255,{chip}
   Response: RELAY-GET_ENERGY_VOLT-255,{chip},{value},OK
   Example:
     Request:  RELAY-GET_ENERGY_VOLT-255,1
     Response: RELAY-GET_ENERGY_VOLT-255,1,220.50,OK

5. GET_ENERGY_FREQ - Get frequency (Hz) for chip
   Request:  RELAY-GET_ENERGY_FREQ-255,{chip}
   Response: RELAY-GET_ENERGY_FREQ-255,{chip},{value},OK
   Example:
     Request:  RELAY-GET_ENERGY_FREQ-255,1
     Response: RELAY-GET_ENERGY_FREQ-255,1,50.00,OK

6. GET_ENERGY_TEMP - Get temperature (C) for chip
   Request:  RELAY-GET_ENERGY_TEMP-255,{chip}
   Response: RELAY-GET_ENERGY_TEMP-255,{chip},{value},OK
   Example:
     Request:  RELAY-GET_ENERGY_TEMP-255,1
     Response: RELAY-GET_ENERGY_TEMP-255,1,35.5,OK

7. GET_ENERGY_PF - Get power factor for chip
   Request:  RELAY-GET_ENERGY_PF-255,{chip}
   Response: RELAY-GET_ENERGY_PF-255,{chip},{value},OK
   Example:
     Request:  RELAY-GET_ENERGY_PF-255,1
     Response: RELAY-GET_ENERGY_PF-255,1,0.95,OK

8. GET_ENERGY_SUM - Get total energy (kWh) for chip
   Request:  RELAY-GET_ENERGY_SUM-255,{chip}
   Response: RELAY-GET_ENERGY_SUM-255,{chip},{value},OK
   Example:
     Request:  RELAY-GET_ENERGY_SUM-255,1
     Response: RELAY-GET_ENERGY_SUM-255,1,12500,OK