Smart Home Automation Forum
[Arduino IDE demo source code for KC868-A8]--#02-RF_receive - Printable Version

+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A8 (https://www.kincony.com/forum/forumdisplay.php?fid=23)
+--- Thread: [Arduino IDE demo source code for KC868-A8]--#02-RF_receive (/showthread.php?tid=1605)

[Arduino IDE demo source code for KC868-A8]--#02-RF_receive - KinCony Support - 01-05-2022

Code 1: //The demo code is RF-receive    You can copy the code to your Arduino IDE

Code:
#include <RCSwitch.h>  //Install library "rcswitch"

RCSwitch mySwitch = RCSwitch();

void setup() {
  Serial.begin(9600);
  mySwitch.enableReceive(digitalPinToInterrupt(15));  //receive PIN IO15
}

void loop() {
  if (mySwitch.available()) {
   
    Serial.print("Received ");
    Serial.print( mySwitch.getReceivedValue() );
    Serial.print(" / ");
    Serial.print( mySwitch.getReceivedBitlength() );
    Serial.print("bit ");
    Serial.print("Protocol: ");
    Serial.println( mySwitch.getReceivedProtocol() );

    mySwitch.resetAvailable();
  }
}