[Arduino IDE demo source code for KC868-AI]--#02-KC868-AI_IR receive_code

Code:
#include <WiFiUdp.h> 





#include "PinDefinitionsAndMore.h"

#include <IRremote.h>



void setup()

{

  Serial.begin(115200);

  Serial.println();

  IrReceiver.begin(IR_RECEIVE_PIN, ENABLE_LED_FEEDBACK, USE_DEFAULT_FEEDBACK_LED_PIN);

 

}



void loop()

{



    if (IrReceiver.decode()) {



        // Print a short summary of received data

        IrReceiver.printIRResultShort(&Serial);

        if (IrReceiver.decodedIRData.protocol == UNKNOWN) {

            // We have an unknown protocol here, print more info

            IrReceiver.printIRResultRawFormatted(&Serial, true);

        }

        Serial.println();

     IrReceiver.resume(); // Enable receiving of the next value

    }

  delay(30);

  

}