+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KinCony AS (https://www.kincony.com/forum/forumdisplay.php?fid=64)
+--- Thread: One input switch - turn on lights one after other (/showthread.php?tid=7245)
One input switch - turn on lights one after other - tziku - 12-19-2024
Hi,
I use A8S v2 for controlling my lights at home.
I have 1 pushbutton at Digital-Input-D1 and i want to controll my lights in this order:
-1st press turn ON K1+K2 ,
-2nd press turn OFF K1
-3rd press turn ON K1 + TURN OFF K2
-4th press turn OFF K1+K2
....then repeat.
Is is possible from IFTTT Settings ?
RE: One input switch - turn on lights one after other - admin - 12-20-2024
sure, just download KCS v2 firmware, then config by IFTTT, it's easy.
here is KCS v2 firmware online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
RE: One input switch - turn on lights one after other - tziku - 12-20-2024
I'm using firmware v2.2.8
Can you be more specific with some examples...i miss something when configuring and I don't succeed.
Thanks,
Cristian.
RE: One input switch - turn on lights one after other - admin - 12-20-2024
post your config screen photo of IFTTT.
RE: One input switch - turn on lights one after other - tziku - 12-26-2024
This is my conf.
Thanks,
Cristian.
RE: One input switch - turn on lights one after other - admin - 12-27-2024
no, IFTTT can't define one DI with different actions.
RE: One input switch - turn on lights one after other - tziku - 12-28-2024
Thanks.
P.S
it would be ideal in the future to be able to do the actions one after the other.
In that way I will be able to control my light bulbs in the hallway
RE: One input switch - turn on lights one after other - admin - 12-28-2024
every different DI can define different actions.