+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A32/A32 Pro (https://www.kincony.com/forum/forumdisplay.php?fid=27)
+--- Thread: KC 868-A32 (/showthread.php?tid=7786)
KC 868-A32 - simona - 03-11-2025
Hi please does kc 868-A32 allow for modbus slave configuration . If no i have ordered 7 of them and can a request to redesign the hardware to allow for modbus slave.Thank you
RE: KC 868-A32 - admin - 03-12-2025
yes, just set by KCS firmware, enable RS485 work with modbus RTU. it will work as "SLAVE" mode.
RE: KC 868-A32 - simona - 03-12-2025
(03-12-2025, 12:05 AM)admin Wrote: yes, just set by KCS firmware, enable RS485 work with modbus RTU. it will work as "SLAVE" mode.
ok but how can i do that , kindly refer me to a video or resources to enable it
RE: KC 868-A32 - admin - 03-12-2025
here is KCS v2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
just set by "protocol" webpage.