+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16 (https://www.kincony.com/forum/forumdisplay.php?fid=25)
+--- Thread: Issues with STA mode (/showthread.php?tid=7913)
Issues with STA mode - DavidSzilasi - 04-07-2025
Hello!
I recently purchased a KC868-a16 and Im in the process of exploring the KCS server. Yesterday I successfully downloaded the firmware onto the board and was able to scan the ethernet network of the board. I used the eth IP to sign into the website but when I switch the networks setting from AP to STA, there was no STA Wifi IP address after refresh. Can you please advise me on what I may be doing wrong.
Thank you!
RE: Issues with STA mode - admin - 04-08-2025
Do your router's ssid is "KC868"? and router's password is "12345678"?
RE: Issues with STA mode - DavidSzilasi - 04-08-2025
Okay, I see what I did wrong. No the ssid and password do not correspond with the router. Thank you for your help