+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: Suggestions and feedback on KinCony's products (https://www.kincony.com/forum/forumdisplay.php?fid=39)
+--- Thread: KCS V2: mqtt topics status and commands (/showthread.php?tid=7934)
KCS V2: mqtt topics status and commands - sm4l - 04-12-2025
Suggested Topic & Payload
SUBSCRIBE MQTT Topic:
KC686-A6/SELFMACADRESS/status
Payload (published every 60 seconds by esp):
{
"sku": "KC686-A6",
"version": "XX.XXX.XX",
"mac": "SELFMACADRESS",
"ip": "IP",
"ssid": "dw360-4g",
"macrouter": "WIFIMAC",
"rssi": -64,
"ut": 125,
"ts": 1744429741
}
Publishing Behavior
- Interval: Every 60 seconds
- Field ut : Incremented uptime in minutes since last boot
- Field ts : Current Unix timestamp (in seconds)
- Purpose: Provides a periodic heartbeat/status update from the device
Suggested Topic & Payload
MQTT Topic:
KC686-A6/SELFMACADRESS/restart
Payload: 1
restart the board
Suggested Topic & Payload
MQTT Topic:
KC686-A6/SELFMACADRESS/wifi
Payload: ssid:password
Switch WIFI credentials