+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: "KCS" v3 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=74)
+--- Forum: "KCS" v3 firmware (https://www.kincony.com/forum/forumdisplay.php?fid=75)
+--- Thread: "KCS" v3.9.2 firmware BIN file download (/showthread.php?tid=8063)
"KCS" v3.9.2 firmware BIN file download - admin - 05-09-2025
v3.9.2 improvement:
1. KinCony G1 controller sensor gpio adds options for GPIO13, 14, and 21.
2. Sensor will automatically retry after initialization fails.
3. After the device is powered off, the sensor corresponding to Home Assistant will automatically become unavailable within 5 minutes.
4. After the Sensor device is removed, it will automatically enter the uninitialized state.
5. Fix the problem of repeated reporting of Home assistant MQTT.
6. Sensor initialization retry & Home assistant status support "Unavailable" change
RE: "KCS" v3.9.2 firmware BIN file download - iozzi_giorgio - 05-10-2025
(05-09-2025, 12:34 PM)admin Wrote: v3.9.2 improvement:
1. KinCony G1 controller sensor gpio adds options for GPIO13, 14, and 21.
2. Sensor will automatically retry after initialization fails.
3. After the device is powered off, the sensor corresponding to Home Assistant will automatically become unavailable within 5 minutes.
4. After the Sensor device is removed, it will automatically enter the uninitialized state.
5. Fix the problem of repeated reporting of Home assistant MQTT.
6. Sensor initialization retry & Home assistant status support "Unavailable" chang
good morning, is the kcs v3.9.2 firmware for a32pro the same for a32?
RE: "KCS" v3.9.2 firmware BIN file download - admin - 05-11-2025
KCS v3 for A32Pro, NOT for A32. they are two different product.