+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A32/A32 Pro (https://www.kincony.com/forum/forumdisplay.php?fid=27)
+--- Thread: KC 868 A32 (/showthread.php?tid=8145)
KC 868 A32 - SP9HYX - 06-08-2025
Good day
Some time ago I bought KC868 A32 and today I tried to connect to the board for the second time. I updated the driver Regarding CH341. On one of the laptops I have W11 and on the other W10/
1. I am trying to scan AP via wifi and it is not on two laptops and a phone (there is no such network - kv868)
2. I am doing a scan (IP scanner) through the router and directly connected to the laptop socket - no effect.
3. I am trying to scan if UPD Scan will show the board but it does not see it
Please help.
RE: KC 868 A32 - admin - 06-08-2025
do you have download KCS firmware by usb-c cable firstly? if new board without KCS firmware in ESP32.
RE: KC 868 A32 - SP9HYX - 06-08-2025
Ok thanks for the info.
I did as in the instructions and the board is still dead and I don't know what I'm doing wrong?
I don't know why I can't attach PrtSc.
I uploaded to KC 868 A32 bin V2.2.13
RE: KC 868 A32 - SP9HYX - 06-08-2025
It started working.
RE: KC 868 A32 - admin - 06-08-2025
ok, good.