+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: "KCS" v3 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=74)
+--- Forum: "KCS" v3 firmware (https://www.kincony.com/forum/forumdisplay.php?fid=75)
+--- Thread: KCS v3 Firmware - Missing Input Colums (/showthread.php?tid=8469)
KCS v3 Firmware - Missing Input Colums - keithc - 08-27-2025
I cannot see the following input table columns when I connect to my A32 Pro; Bind Output, Function, ON, OFF, Toggle (see attached image of what I see. No scroll/pan features)
I have A32 Pro Firmware 3.11.3
I installed as ESP32S3, develop, USB
I have reloaded the firmware twice and tried on different computers without success
Please help
RE: KCS v3 Firmware - Missing Input Colums - admin - 08-27-2025
now use by IFTTT webpage, you can check with KCS v3 online guide: https://www.kincony.com/how-to-use-kcsv3-firmware-esp32-board.html
RE: KCS v3 Firmware - Missing Input Colums - keithc - 08-27-2025
(08-27-2025, 12:33 PM)admin Wrote: now use by IFTTT webpage, you can check with KCS v3 online guide: https://www.kincony.com/how-to-use-kcsv3-firmware-esp32-board.html
Thank you