+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: "KCS" v3 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=74)
+--- Forum: "KCS" v3 firmware (https://www.kincony.com/forum/forumdisplay.php?fid=75)
+--- Thread: "KCS" v3.12.0 firmware BIN file download (/showthread.php?tid=8498)
"KCS" v3.12.0 firmware BIN file download - admin - 09-06-2025
v3.12.0 improvement:
1. Adapt to new KinCony Controller: B8/B8M/B24/B24M/DM16
2. Sensor pull-up option: When PCB include pull-up resistor, "pull-up" will auto shown as enabled
3. Network webpage -- LAN mode will show the actual ethernet IP address
4. GSM phone list: Add ID numbers
5. Password-related inputs option added masking
6. Sensor configuration webpage: added sensor name
7. IFTTT "sensor channel" change to "sensor name" have preset
8. Removed default MQTT port number "1883"
9. IFTTT THEN actions: Add "step value" for AO (analog output)
10. improve previous version first time downloaded firmware boot up speed slowly issue.