Kincony not started. - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20) +--- Forum: KC868-A8v3 (https://www.kincony.com/forum/forumdisplay.php?fid=78) +--- Thread: Kincony not started. (/showthread.php?tid=8783)

Kincony not started. - Proger - 12-01-2025 I have a Kincony KC868 A8 V3.1 board. After flashing the firmware and powering it on, the display shows "Kincony" and the yellow LED starts blinking. The board doesn't display the IP address. What's wrong with the board? RE: Kincony not started. - admin - 12-01-2025 take a photo of your pcb board. take a photo of your esp32 download tool setting when you download firmware. RE: Kincony not started. - Proger - 12-02-2025 Photos RE: Kincony not started. - admin - 12-02-2025 you have not select the firmware file. see the photo, you have lose step-3. RE: Kincony not started. - Proger - 12-03-2025 Thanks! All ok! RE: Kincony not started. - admin - 12-03-2025 ok