+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=87)
+--- Forum: N10 (https://www.kincony.com/forum/forumdisplay.php?fid=95)
+--- Thread: N10 port modbus (/showthread.php?tid=9085)
Pages:
1
2
N10 port modbus - R43 - 03-03-2026
There's no way to change the speed and port using Modbus. Please fix this or send me a firmware update with port 4 instead of the default 1. Thank you.
RE: N10 port modbus - admin - 03-03-2026
RS485 use by modbus. what's your means?
RE: N10 port modbus - R43 - 03-03-2026
(03-03-2026, 12:49 PM)admin Wrote: RS485 use by modbus. what's your means?I have a question about how to change the speed and port on the device.
RE: N10 port modbus - admin - 03-04-2026
RS485 is connected with ARM CPU pin, it fixed.
RE: N10 port modbus - R43 - 03-04-2026
(03-04-2026, 02:03 AM)admin Wrote: RS485 is connected with ARM CPU pin, it fixed.
Oh my god! So, if I have two N10s next to each other, I can't fully use them via Modbus. This should be specifically mentioned in the description! I need firmware with 4 ports!
RE: N10 port modbus - admin - 03-04-2026
why can't connect with multi N10? just download KCS v3 firmware, set the RS485 address for N10. then you can read by modbus. You can set different address for different N10.
RE: N10 port modbus - R43 - 03-04-2026
(03-04-2026, 07:31 AM)admin Wrote: why can't connect with multi N10? just download KCS v3 firmware, set the RS485 address for N10. then you can read by modbus. You can set different address for different N10.
It costs KCS v3 firmware, which was written in the first post. There is no modbus control, look carefully for yourself! There is no such thing on the menu!
RE: N10 port modbus - admin - 03-05-2026
You can use PC software, connect to Nx board by USB-RS485 adapter . So that can set for RS485 modbus address.
RE: N10 port modbus - R43 - 03-05-2026
(03-05-2026, 12:39 AM)admin Wrote: You can use PC software, connect to Nx board by USB-RS485 adapter . So that can set for RS485 modbus address.
So give me a link where I can download it!
RE: N10 port modbus - admin - 03-05-2026
i suggest you wait for some days, we will release new ARM CPU firmware and PC software soon.
it will support 0.001kwh for unit.