+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=87)
+--- Forum: N10 (https://www.kincony.com/forum/forumdisplay.php?fid=95)
+--- Thread: how to read BL0910 energy chip RAW data by modbus pull via RS485 (/showthread.php?tid=9163)
how to read BL0910 energy chip RAW data by modbus pull via RS485 - admin - 03-24-2026
1: open NX_chip.mbp in modbus pull software.
2: set COM port. you can use USB-RS485 adapter connect to your computer:
3:
you can read BL0910-1 chip from address 100 , register count: 68
you can read BL0910-2 chip from address 200 , register count: 68
you can read BL0910-3 chip from address 300 , register count: 68
you can read BL0910-4 chip from address 400 , register count: 68
you can read BL0910-5 chip from address 500 , register count: 68
you can read BL0910-6 chip from address 600 , register count: 68