+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: "KCS" v3 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=74)
+--- Forum: "KCS" v3 firmware (https://www.kincony.com/forum/forumdisplay.php?fid=75)
+--- Thread: KC868-A16-V3.1 MODBUS RS485 (/showthread.php?tid=9284)
KC868-A16-V3.1 MODBUS RS485 - dponyatov - 04-20-2026
this command work ok:
01 05 00 00 ff 00 8c 3a
but read coil report 07 coils enabled (shifted)
coil write from 08 coil and above does nothing: no LEDs, no affection on coils read
RE: KC868-A16-V3.1 MODBUS RS485 - admin - 04-21-2026
repied you in another thread. make sure select the standard modbus protocol, in KCS RS485 config webpage.