+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: Suggestions and feedback on KinCony's products (https://www.kincony.com/forum/forumdisplay.php?fid=39)
+--- Thread: Add uptime to board information (/showthread.php?tid=9288)
Add uptime to board information - twostar - 04-24-2026
Would it be possible to add an uptime counter to the KC868 front page? At the moment it displays system time, IP address, etc, but not how long it's been running. The reason I'd like to know is that I keep getting sensors going offline briefly and then back online again and I don't know if it's the board rebooting or something else.
RE: Add uptime to board information - admin - 04-24-2026
thanks for suggestion. we will check whether can add this.
RE: Add uptime to board information - twostar - 04-24-2026
Thanks! It would be useful to help debug the problem of the sensors briefly going offline.
RE: Add uptime to board information - useful21 - 04-25-2026
I like that idea. It would be very good to see uptime, please can we report that via MQTT too?
RE: Add uptime to board information - admin - 04-25-2026
read by MQTT, if every second feedback by mqtt, will cost network resource.
RE: Add uptime to board information - twostar - 04-25-2026
It doesn't have to be every second, in fact that would be excessive, just include the information whenever other MQTT updates are made, it's a big JSON blob so it'd just be one extra field in there. It's not acting as a heartbeat but just reporting how long the system has been running since the last restart occurred so it doesn't have to be instant.
One other thing in case the original post wasn't clear, please make whatever gets reported an uptime, so time elapsed since the last restart, and not an absolute time, so the time of the last restart. The time zone sometimes gets messed up so knowing that the uptime was three hours is better than knowing that that last restart was at time X which is being modified by the time zone setting.
RE: Add uptime to board information - admin - 04-26-2026
ok, when our software team have free time, will test that. now is developing for some new update.
RE: Add uptime to board information - twostar - 04-26-2026
Great, thanks!