+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-M16 / M1 / MB / M30 (https://www.kincony.com/forum/forumdisplay.php?fid=50)
+--- Thread: M30 Power Factor (/showthread.php?tid=9427)
M30 Power Factor - Gyro - 06-03-2026
dear Admin,
using M30 on 240 VAC I get Power factor values outside the range (0-100), for example 190 or 3000
I use the ARM firmware: M30_V10_241107Res249Unsign.bin
here's the config:
platform: modbus_controller
modbus_controller_id: modbus_hub_m30
address: 1166
register_type: holding
name: pf1
id: m30_1_pf
accuracy_decimals: 1
value_type: U_DWORD_R
filters:
- multiply: 0.000011921
RE: M30 Power Factor - admin - 06-03-2026
how about you read by RS485 modbus. the RAW value. if this data also outside the range (0-100). tell me.