KinCony MT4 – 4CH ESP32 DC Motor Driver released - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5) +--- Thread: KinCony MT4 – 4CH ESP32 DC Motor Driver released (/showthread.php?tid=9615)

KinCony MT4 – 4CH ESP32 DC Motor Driver released - admin - 07-11-2026 KinCony MT4 ESP32-S3 4 Channel DC Motor Controller Overview KinCony MT4 is a professional 4 Channel DC Motor Controller based on the ESP32-S3-WROOM-1 (N16R8) module. It is designed for smart home automation, industrial automation, DIY IoT projects, motorized curtains, electric valves, linear actuators, robotic systems and other DC motor control applications. MT4 integrates 4 independent DC motor drivers, RS485, 433MHz RF receiver, IR receiver, I²C expansion interface, 1-Wire GPIO, WiFi, Bluetooth, USB-C, and a Tuya WiFi module into one compact DIN Rail controller. Whether you are a developer, system integrator, or smart home enthusiast, MT4 provides multiple firmware options, including KinCony KCS v3, ESPHome, Tasmota, Arduino, ESP-IDF, and MicroPython. Features ESP32-S3-WROOM-1 (N16R8) Dual-Core Processor 4 Channel DC Motor Driver (L298N) Supports Forward / Reverse / Stop control Maximum 2A load per motor channel Built-in WiFi & Bluetooth Built-in Tuya WiFi module RS485 interface (Modbus supported by KCS firmware) USB Type-C programming interface 433MHz RF Receiver IR Receiver I²C Expansion Port 2 Channel 1-Wire GPIO DIN Rail installation with plastic enclosure Open-source hardware platform Supports Arduino IDE Supports ESP-IDF Supports MicroPython Supports ESPHome Supports Tasmota Home Assistant MQTT Auto Discovery Apple HomeKit support (KCS v3 firmware) Applications KinCony MT4 is suitable for various automation projects, including: Motorized Curtains Roller Blinds Window Openers Electric Valves Linear Actuators Smart Furniture Automatic Doors Smart Agriculture Industrial Automation DIY IoT Projects Home Automation Systems Technical Specifications Item SpecificationModel KinCony MT4 Processor ESP32-S3-WROOM-1 (N16R8) Power Supply DC 12V Motor Driver L298N Motor Outputs 4 Channels Maximum Motor Current 2A per Channel Communication WiFi / Bluetooth Interfaces RS485, USB-C, IR Receiver, 433MHz RF Receiver, I²C Expansion GPIO 2 Channel 1-Wire GPIO Installation DIN Rail PCB Size 87 × 93 mm Hardware Interfaces Outputs 4 × DC Motor Outputs Maximum Load: 2A per channel Inputs 2 × 1-Wire GPIO Built-in pull-up resistors Buttons S1 – ESP32 Reset S2 – Download Mode (GPIO0) S3 – Tuya Configuration Button Communication Interfaces WiFi Bluetooth RS485 USB Type-C 433MHz RF Receiver IR Receiver I²C Expansion Interface