KinCony Analog Input Wiring Guide: 0–5 V, 0–10 V and 4–20 mA - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: Schematic & diagram & Dimensions of KinCony PCB layout CAD file (https://www.kincony.com/forum/forumdisplay.php?fid=33) +--- Thread: KinCony Analog Input Wiring Guide: 0–5 V, 0–10 V and 4–20 mA (/showthread.php?tid=9907)

KinCony Analog Input Wiring Guide: 0–5 V, 0–10 V and 4–20 mA - admin - 10-26-2026     0–5 V / 0–10 V: Connect the sensor OUT to AI1. Connect the sensor and controller to a common GND. 2-wire 4–20 mA: Power supply positive → Transmitter +; Transmitter − → AI1; Controller GND → Power supply negative. Before use, configure the input range and jumper settings according to your controller model. The 4–20 mA wiring example applies to passive current inputs with an onboard sampling resistor.