Smart Home Automation Forum › Technical Support › B16
B16 ESPHome yaml for home assistant with tuya

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
B16 ESPHome yaml for home assistant with tuya
admin Offline
Administrator
*******
Posts: 9,134
Threads: 1,204
Joined: Oct 2020
Reputation: 236
#1
02-22-2025, 01:53 AM
Code:
esphome:
  name: b16
  friendly_name: b16
  platformio_options:
    board_build.extra_flags:
      # WIFI_CONTROL_SELF_MODE = 0
      # WIFI_CONTROL_SELF_MODE = 1
      - "-DWIFI_CONTROL_SELF_MODE=1"
esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino
   
   
   

external_components:
  - source:
      type: git
      url: https://github.com/hzkincony/esphome-tuya-wifi-mcu
      ref: v1.1.0

# Enable logging
# logger:
#   hardware_uart: USB_SERIAL_JTAG
# Enable Home Assistant API
api:
  encryption:
    key: "WeVOuL5oNhjXcfzXtTirlOwvtWvCD5yqIxd3oV4es1k="

ethernet:
  type: W5500
  clk_pin: GPIO1
  mosi_pin: GPIO2
  miso_pin: GPIO41
  cs_pin: GPIO42
  interrupt_pin: GPIO43
  reset_pin: GPIO44

i2c:
   - id: bus_a
     sda: 8
     scl: 18
     scan: true
     frequency: 400kHz

pcf8574:
  - id: 'pcf8574_hub_out_1'  # for output channel 1-16
    i2c_id: bus_a
    address: 0x22
    pcf8575: true

  - id: 'pcf8574_hub_in_1'  # for input channel 1-16
    i2c_id: bus_a
    address: 0x24
    pcf8575: true

uart:
  - id: uart_1    #RS485
    baud_rate: 9600
    debug:
      direction: BOTH
      dummy_receiver: true
      after:
        timeout: 10ms
    tx_pin: 39
    rx_pin: 38

  - id: tuya_mcu_uart
    tx_pin: GPIO16
    rx_pin: GPIO17
    baud_rate: 9600

tuya_wifi_mcu:
  # tuya mcu product id
  product_id: byxtsco8rwt4x8km
  uart_id: tuya_mcu_uart
  wifi_reset_pin: 28
  wifi_led_pin: 16

switch:
  - platform: uart
    uart_id: uart_1
    name: "RS485 Button"
    data: [0x11, 0x22, 0x33, 0x44, 0x55]

  - platform: gpio
    name: "b16-output01"
    id: "b16_output01"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 0
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output1-tuya
    dp_id: 1
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output01"

  - platform: gpio
    name: "b16-output02"
    id: "b16_output02"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 1
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output2-tuya
    dp_id: 2
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output02"

  - platform: gpio
    name: "b16-output03"
    id: "b16_output03"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 2
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output3-tuya
    dp_id: 3
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output03"

  - platform: gpio
    name: "b16-output04"
    id: "b16_output04"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 3
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output4-tuya
    dp_id: 4
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output04"

  - platform: gpio
    name: "b16-output05"
    id: "b16_output05"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 4
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output5-tuya
    dp_id: 5
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output05"

  - platform: gpio
    name: "b16-output06"
    id: "b16_output06"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 5
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output6-tuya
    dp_id: 6
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output06"

  - platform: gpio
    name: "b16-output07"
    id: "b16_output07"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 6
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output7-tuya
    dp_id: 101
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output07"

  - platform: gpio
    name: "b16-output08"
    id: "b16_output08"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 7
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output8-tuya
    dp_id: 102
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output08"

  - platform: gpio
    name: "b16-output09"
    id: "b16_output09"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 8
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output9-tuya
    dp_id: 103
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output09"

  - platform: gpio
    name: "b16-output10"
    id: "b16_output10"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 9
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output10-tuya
    dp_id: 104
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output10"

  - platform: gpio
    name: "b16-output11"
    id: "b16_output11"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 10
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output11-tuya
    dp_id: 105
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output11"

  - platform: gpio
    name: "b16-output12"
    id: "b16_output12"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 11
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output12-tuya
    dp_id: 106
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output12"

  - platform: gpio
    name: "b16-output13"
    id: "b16_output13"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 12
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output13-tuya
    dp_id: 107
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output13"

  - platform: gpio
    name: "b16-output14"
    id: "b16_output14"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 13
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output14-tuya
    dp_id: 108
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output14"

  - platform: gpio
    name: "b16-output15"
    id: "b16_output15"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 14
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output15-tuya
    dp_id: 109
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output15"

  - platform: gpio
    name: "b16-output16"
    id: "b16_output16"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 15
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-output16-tuya
    dp_id: 110
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "b16_output16"

binary_sensor:
  - platform: gpio
    name: "b16-input01"
    id: "b16_input01"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 0
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input1-tuya
    dp_id: 111
    bind_binary_sensor_id: b16_input01
    internal: true

  - platform: gpio
    name: "b16-input02"
    id: "b16_input02"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 1
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input2-tuya
    dp_id: 112
    bind_binary_sensor_id: b16_input02
    internal: true

  - platform: gpio
    name: "b16-input03"
    id: "b16_input03"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 2
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input3-tuya
    dp_id: 113
    bind_binary_sensor_id: b16_input03
    internal: true

  - platform: gpio
    name: "b16-input04"
    id: "b16_input04"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 3
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input4-tuya
    dp_id: 114
    bind_binary_sensor_id: b16_input04
    internal: true

  - platform: gpio
    name: "b16-input05"
    id: "b16_input05"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 4
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input5-tuya
    dp_id: 115
    bind_binary_sensor_id: b16_input05
    internal: true

  - platform: gpio
    name: "b16-input06"
    id: "b16_input06"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 5
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input6-tuya
    dp_id: 116
    bind_binary_sensor_id: b16_input06
    internal: true

  - platform: gpio
    name: "b16-input07"
    id: "b16_input07"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 6
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input7-tuya
    dp_id: 117
    bind_binary_sensor_id: b16_input07
    internal: true

  - platform: gpio
    name: "b16-input08"
    id: "b16_input08"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 7
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input8-tuya
    dp_id: 118
    bind_binary_sensor_id: b16_input08
    internal: true

  - platform: gpio
    name: "b16-input09"
    id: "b16_input09"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 8
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input9-tuya
    dp_id: 119
    bind_binary_sensor_id: b16_input09
    internal: true

  - platform: gpio
    name: "b16-input10"
    id: "b16_input10"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 9
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input10-tuya
    dp_id: 120
    bind_binary_sensor_id: b16_input10
    internal: true

  - platform: gpio
    name: "b16-input11"
    id: "b16_input11"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 10
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input11-tuya
    dp_id: 121
    bind_binary_sensor_id: b16_input11
    internal: true

  - platform: gpio
    name: "b16-input12"
    id: "b16_input12"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 11
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input12-tuya
    dp_id: 122
    bind_binary_sensor_id: b16_input12
    internal: true

  - platform: gpio
    name: "b16-input13"
    id: "b16_input13"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 12
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input13-tuya
    dp_id: 123
    bind_binary_sensor_id: b16_input13
    internal: true

  - platform: gpio
    name: "b16-input14"
    id: "b16_input14"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 13
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input14-tuya
    dp_id: 124
    bind_binary_sensor_id: b16_input14
    internal: true

  - platform: gpio
    name: "b16-input15"
    id: "b16_input15"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 14
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input15-tuya
    dp_id: 125
    bind_binary_sensor_id: b16_input15
    internal: true

  - platform: gpio
    name: "b16-input16"
    id: "b16_input16"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 15
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: b16-input16-tuya
    dp_id: 126
    bind_binary_sensor_id: b16_input16
    internal: true

##pull-up resistance on PCB
  - platform: gpio
    name: "b16-W1-io48"
    pin:
      number: 48
      inverted: true

  - platform: gpio
    name: "b16-W1-io47"
    pin:
      number: 47
      inverted: true

  - platform: gpio
    name: "b16-W1-io40"
    pin:
      number: 40
      inverted: true

  - platform: gpio
    name: "b16-W1-io7"
    pin:
      number: 7
      inverted: true
## without resistance on PCB
  - platform: gpio
    name: "b16-io13"
    pin:
      number: 13
      inverted: false

  - platform: gpio
    name: "b16-io14"
    pin:
      number: 14
      inverted:  false

  - platform: gpio
    name: "b16-21"
    pin:
      number: 21
      inverted:  false

  - platform: gpio
    name: "b16-0"
    pin:
      number: 0
      inverted:  false

ads1115:
  - address: 0x48
sensor:
  - platform: ads1115
    multiplexer: 'A0_GND'
    gain: 6.144
    resolution: 16_BITS
    name: "ADS1115 Channel A0-GND"
    update_interval: 5s
  - platform: ads1115
    multiplexer: 'A1_GND'
    gain: 6.144
    name: "ADS1115 Channel A1-GND"
    update_interval: 5s
  - platform: ads1115
    multiplexer: 'A2_GND'
    gain: 6.144
    name: "ADS1115 Channel A2-GND"
    update_interval: 5s
  - platform: ads1115
    multiplexer: 'A3_GND'
    gain: 6.144
    name: "ADS1115 Channel A3-GND"
    update_interval: 5s

web_server:
  port: 80

font:
  - file: "gfonts://Roboto"
    id: roboto
    size: 20

display:
  - platform: ssd1306_i2c
    i2c_id: bus_a
    model: "SSD1306 128x64"
    address: 0x3C
    lambda: |-
      it.printf(0, 0, id(roboto), "KinCony B16");
download yaml file:
.txt   B16-HA.txt (Size: 13.84 KB / Downloads: 310)
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Alibaba Store: https://kincony.en.alibaba.com/
Find
Reply
ck1 Offline
dpck
**
Posts: 10
Threads: 0
Joined: Jun 2025
Reputation: 0
#2
07-03-2025, 07:00 AM
I have purchased a B16. And I run this YAML file to flash. These are the errors I have received. Attached is the log.
.txt   logs_b16_run.txt (Size: 28.98 KB / Downloads: 113)

1. WARNING Using `switch.SWITCH_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. Please use `switch.switch_schema(...)` instead. If you are seeing this, report an issue to the external_component author and ask them to update it. https://developers.esphome.io/blog/2025/...recations/. Component using this schema: tuya_wifi_mcu 

and then this:

2.
Compiling .pioenvs/b16/FrameworkArduino/FunctionalInterrupt.cpp.o 
.piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaWifi.cpp: In constructor 'TuyaWifi::TuyaWifi()': 
.piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaWifi.cpp:34:33: error: no matching function for call to 'TuyaUart:Confusedet_serial(USBCDC*)' 
    tuya_uart.set_serial(&Serial); 
                                           ^ 
In file included from .piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaWifi.h:19,
                      from .piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaWifi.cpp:15: .piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaUart.h:46:10: note: candidate: 'void TuyaUart:Confusedet_serial(HardwareSerial*)'
                                void set_serial(TY_UART *serial); 
^~~~~~~~~~ 
.piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaUart.h:46:10: note: no known conversion for argument 1 from 'USBCDC*' to 'HardwareSerial*' 
*** [.pioenvs/b16/libe10/Tuya_WiFi_MCU_SDK/TuyaWifi.cpp.o] Error 1 
========================= [FAILED] Took 238.15 seconds =========================
Find
Reply
admin Offline
Administrator
*******
Posts: 9,134
Threads: 1,204
Joined: Oct 2020
Reputation: 236
#3
07-03-2025, 08:05 AM
later we will upload new file, because esphome have updated.
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Alibaba Store: https://kincony.en.alibaba.com/
Find
Reply
ck1 Offline
dpck
**
Posts: 10
Threads: 0
Joined: Jun 2025
Reputation: 0
#4
07-09-2025, 08:49 AM
(07-03-2025, 08:05 AM)admin Wrote: later we will upload new file, because esphome have updated.

Still waiting for the new YAML file please. Thank you  Smile
Find
Reply
admin Offline
Administrator
*******
Posts: 9,134
Threads: 1,204
Joined: Oct 2020
Reputation: 236
#5
07-09-2025, 11:51 AM
tested compile with esphome 2025.6.3 without any issue.
   
   
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Alibaba Store: https://kincony.en.alibaba.com/
Find
Reply
ck1 Offline
dpck
**
Posts: 10
Threads: 0
Joined: Jun 2025
Reputation: 0
#6
07-09-2025, 12:46 PM
(07-09-2025, 11:51 AM)admin Wrote: tested compile with esphome 2025.6.3 without any issue.

ok, thank you. I have tried again and seems that all is well.
Find
Reply
ck1 Offline
dpck
**
Posts: 10
Threads: 0
Joined: Jun 2025
Reputation: 0
#7
07-15-2025, 12:20 AM
Sir, I'm enjoying my B16. Thank you for giving us the opportunity to play with smart home by your consistent innovations. I even more appreciate your sharing of knowledge. Thank you!

I'd like to just say this for this warning keeps coming up. We are still getting this messages every time we compile our YAML file. It is not an error, but just a warning. I thought you might like to update it.

WARNING Using `switch.SWITCH_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. Please use `switch.switch_schema(...)` instead. If you are seeing this, report an issue to the external_component author and ask them to update it. https://developers.esphome.io/blog/2025/...recations/. Component using this schema: tuya_wifi_mcu 

Again, I enjoy your products very much. You at Kincony are so innovative, hardworking and generous to share knowledge. And you always answer very quickly. 

Thank you. Have a good day!
Find
Reply
admin Offline
Administrator
*******
Posts: 9,134
Threads: 1,204
Joined: Oct 2020
Reputation: 236
#8
07-16-2025, 12:07 AM
yes, we will update this in future, because ESPHome have some new update. But now it also can compile yaml file without issue.
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Alibaba Store: https://kincony.en.alibaba.com/
Find
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)