05-24-2025, 01:21 AM
Hello!
So I bought A32 device, and I want it to drive my blinds. First I tried with original KCS firmware. While hardware is pretty decent, the firmware unfortunately seems to be half-baked
Questions/issues I have -
1) I couldn't find any option to save/restore configuration from device. If you need to configure all relays on device with so many ports - it extremally inconvenient to re-configure everything you are trying new firmware (or just updating it). Or maybe Im just missing something ?
2) I want to configure slightly more complex behavior for this board -
I have momentary buttons (up/down), so I wanted to
a) run motor only when button is pressed
b) with long-click - open/close roller completely
c) with double-click - open/close to 50%
I tried to use rising/falling edge detection for start/stop motor, - this works, but then I cannot configure any other functions like longclick or doubleclick
4) "Jogging" functionality seems not working in this firmware at all, or I just dont know how to configure it.
5) I was able to find only v2 (KCS_KC868_A32_V2.2.13.zip) of KCS firmware for this device , maybe there is some update with fixes for my above issues ?
So I bought A32 device, and I want it to drive my blinds. First I tried with original KCS firmware. While hardware is pretty decent, the firmware unfortunately seems to be half-baked
Questions/issues I have -
1) I couldn't find any option to save/restore configuration from device. If you need to configure all relays on device with so many ports - it extremally inconvenient to re-configure everything you are trying new firmware (or just updating it). Or maybe Im just missing something ?
2) I want to configure slightly more complex behavior for this board -
I have momentary buttons (up/down), so I wanted to
a) run motor only when button is pressed
b) with long-click - open/close roller completely
c) with double-click - open/close to 50%
I tried to use rising/falling edge detection for start/stop motor, - this works, but then I cannot configure any other functions like longclick or doubleclick
4) "Jogging" functionality seems not working in this firmware at all, or I just dont know how to configure it.
5) I was able to find only v2 (KCS_KC868_A32_V2.2.13.zip) of KCS firmware for this device , maybe there is some update with fixes for my above issues ?