08-13-2025, 08:01 PM
Just to be safe, I've updated ESPHome and specified the latest version of the kc868-ha component (v3.0.2).
In terms of functionality, nothing has changed. The switch states (D1-D6) are being read correctly and can be controlled from ESPHome. However, the input states (K1-K6) aren't being read, even though the kc868-ha packets appear in the logs as shown in the initial message.
22:59:41 [D] [kc868_ha:021]
uart bus receive 1:10:0:a:0:6:c:65:0:0:0:0:0:0:0:0:0:0:0:0:fc
22:59:41 [D] [kc868_ha:032]
uart crc=0:fc, calc crc=0:fc
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=1
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=2
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=3
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=4
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=5
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=6
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=1
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=2
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=3
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=4
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=5
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=6
Additionally, after updating ESPHome, I'm now getting these new warnings:
WARNING Using `binary_sensor.BINARY_SENSOR_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. Please use `binary_sensor.binary_sensor_schema(...)` instead. If you are seeing this, report an issue to the external_component author and ask them to update it. https://developers.esphome.io/blog/2025/...recations/. Component using this schema: kc868_ha
WARNING Using `switch.SWITCH_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. Please use `switch.switch_schema(...)` instead. If you are seeing this, report an issue to the external_component author and ask them to update it. https://developers.esphome.io/blog/2025/...recations/. Component using this schema: kc868_ha
In terms of functionality, nothing has changed. The switch states (D1-D6) are being read correctly and can be controlled from ESPHome. However, the input states (K1-K6) aren't being read, even though the kc868-ha packets appear in the logs as shown in the initial message.
22:59:41 [D] [kc868_ha:021]
uart bus receive 1:10:0:a:0:6:c:65:0:0:0:0:0:0:0:0:0:0:0:0:fc
22:59:41 [D] [kc868_ha:032]
uart crc=0:fc, calc crc=0:fc
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=1
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=2
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=3
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=4
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=5
22:59:41 [D] [kc868_ha:045]
dump kc868_ha config, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=6
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=1
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=2
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=3
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=4
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=5
22:59:41 [D] [kc868_ha:056]
found a kc868_ha board, target_relay_controller_addr=1, switch_adapter_addr=10, bind_output=6
Additionally, after updating ESPHome, I'm now getting these new warnings:
WARNING Using `binary_sensor.BINARY_SENSOR_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. Please use `binary_sensor.binary_sensor_schema(...)` instead. If you are seeing this, report an issue to the external_component author and ask them to update it. https://developers.esphome.io/blog/2025/...recations/. Component using this schema: kc868_ha
WARNING Using `switch.SWITCH_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. Please use `switch.switch_schema(...)` instead. If you are seeing this, report an issue to the external_component author and ask them to update it. https://developers.esphome.io/blog/2025/...recations/. Component using this schema: kc868_ha