KC868-M16v2 configure yaml for ESPhome

[sanketgroup]

M16v2 or M30 board?

have tested with ESPHome: 2025.7.5

I downloaded this txt file and installed on the board.

But still getting same error.

Code:

[19:36:03]E (492) ADC: CONFLICT! driver_ng is not allowed to be used with the legacy driver
[19:36:03]
[19:36:03]abort() was called at PC 0x40103bef on core 0
[19:36:03]
[19:36:03]
[19:36:03]Backtrace: 0x40083679:0x3ffe3b30 0x4008dec9:0x3ffe3b50 0x400940c5:0x3ffe3b70 0x40103bef:0x3ffe3bf0 0x400f9eaa:0x3ffe3c10 0x40082b8a:0x3ffe3c40 0x400796aa:0x3ffe3c90 |<-CORRUPTED
[19:36:03]
[19:36:03]
[19:36:03]
[19:36:03]
[19:36:03]ELF file SHA256: 96dd0c6d8
[19:36:03]
[19:36:03]E (512) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
[19:36:03]E (520) esp_core_dump_elf: Elf write init failed!
[19:36:03]E (525) esp_core_dump_common: Core dump write failed with error=-1
[19:36:03]Rebooting...
[19:36:03]ets Jul 29 2019 12:21:46
[19:36:03]
[19:36:03]rst:0xc (SW_CPU_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
[19:36:03]configsip: 0, SPIWP:0xee
[19:36:03]clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
[19:36:03]mode:DIO, clock div:2
[19:36:03]load:0x3fff0030,len:4688
[19:36:03]load:0x40078000,len:15504
[19:36:03]load:0x40080400,len:4
[19:36:03]load:0x40080404,len:3196
[19:36:03]entry 0x400805a4