Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
how to integrate KC868-A8 to home assistant by MQTT
#34
(10-02-2025, 10:44 PM)admin Wrote: the firmware too old. please download newest KCS v2 firmware: https://www.kincony.com/forum/showthread.php?tid=8267

Hello again,
 Firmware updated, unfortunately, now it does not communicate at all with HA.
All credentials are set (user, pass, IP, port) but no luck.
I used v2.2.14, several times downloading stopped due to comm error, can be a cable or something else, but process was finished, everything else is working except MQTT :-)

Log from MQTT:
2025-10-04 09:26:46: Client <unknown> disconnected due to protocol error.
[09:26:48] INFO: Successfully send discovery information to Home Assistant.
[09:26:50] INFO: Successfully send service information to the Supervisor.
2025-10-04 09:26:53: New connection from 172.30.32.1:48335 on port 1883.
2025-10-04 09:26:53: New client connected from 172.30.32.1:48335 as 0BnDBQigbsncamiStHmizu (p2, c1, k60, u'mqtt').
2025-10-04 09:27:16: New connection from 172.30.32.2:56082 on port 1883.
2025-10-04 09:27:16: Client <unknown> closed its connection.
2025-10-04 09:27:24: New connection from 172.30.32.1:54105 on port 1883.
2025-10-04 09:27:24: New client connected from 172.30.32.1:54105 as 5kunAzYa87n16r4Y5BCCyD (p2, c1, k60, u'mqtt-user').
2025-10-04 09:27:25: Client 5kunAzYa87n16r4Y5BCCyD disconnected.
2025-10-04 09:27:25: Client 0BnDBQigbsncamiStHmizu disconnected.
2025-10-04 09:27:25: New connection from 172.30.32.1:48293 on port 1883.
2025-10-04 09:27:25: New client connected from 172.30.32.1:48293 as 0ca9UAol92FRsGjaOXn4nR (p2, c1, k60, u'mqtt-user').
2025-10-04 09:27:25: Client 0ca9UAol92FRsGjaOXn4nR disconnected.
2025-10-04 09:27:25: New connection from 172.30.32.1:42013 on port 1883.
2025-10-04 09:27:25: New client connected from 172.30.32.1:42013 as 2e7LdLhHfwMgdJaO4vEPbz (p2, c1, k60, u'mqtt-user').
2025-10-04 09:27:51: Client 2e7LdLhHfwMgdJaO4vEPbz closed its connection.
2025-10-04 09:28:26: New connection from 172.30.32.1:46545 on port 1883.
2025-10-04 09:28:26: New client connected from 172.30.32.1:46545 as 7ARl5WtqMIJTUwmchaGa06 (p2, c1, k60, u'mqtt-user').
Reply


Messages In This Thread
RE: how to integrate KC868-A8 to home assistant by MQTT - by ags.servis - 10-04-2025, 07:25 AM

Forum Jump:


Users browsing this thread:
1 Guest(s)