11-12-2025, 08:49 AM
Hello.
I bought N30. Download and write KCS v3.15.0 firmware for N30.
Some observations.
After changing Current Factor to take effect Reset ARM CPU button must be pressed.
Current Factor:
In youtube video Current Factor mean:
Value*CurrentFactor=desired value.
It's not TRUE. It works like:
Value/CurrentFactor=desired value.
![[Image: N30-04.webp]](https://i.ibb.co/rG2DWC7s/N30-04.webp)
![[Image: N30-01.webp]](https://i.ibb.co/PGPNVBT2/N30-01.webp)
I use CT 3000/1 and need to correct values. N30 gives 0.12A instead real value is about 0.17A
Next one. I connect to N2L2 to power source.
![[Image: N30-02.webp]](https://i.ibb.co/N2KHzLCL/N30-02.webp)
![[Image: N30-03.webp]](https://i.ibb.co/v4VyFnTj/N30-03.webp)
And I have Power Factor is 0.00. Is it correct?
Voltage and 228.9Frequency are shown correctly.
Best wishes.
I bought N30. Download and write KCS v3.15.0 firmware for N30.
Some observations.
After changing Current Factor to take effect Reset ARM CPU button must be pressed.
Current Factor:
In youtube video Current Factor mean:
Value*CurrentFactor=desired value.
It's not TRUE. It works like:
Value/CurrentFactor=desired value.
I use CT 3000/1 and need to correct values. N30 gives 0.12A instead real value is about 0.17A
Next one. I connect to N2L2 to power source.
And I have Power Factor is 0.00. Is it correct?
Voltage and 228.9Frequency are shown correctly.
Best wishes.