01-03-2026, 12:02 PM
Hi,
Finally I've received the kc868-a16 unit and got it working. Or at least somewhat working. I've flashed the kcs_kc868_a16_v2.2.18 firmware and it seems to be working. The board boots up and I can connect to it through the browser but I can't control it.
In the monitor tab there is the output section and I can click on ALL ON or ALL OFF and the squares go green or gray but the board doesn't do anything. The led indicators don't turn on and checking with a multimeter there isn't anything opening or closing.
I've tried shorting the digital inputs but that doesn't do anything either.
Link for the problem: https://youtube.com/shorts/ekwEwoERshc
Am I missing something? Do I need to set up anything else?
Thanks!
Finally I've received the kc868-a16 unit and got it working. Or at least somewhat working. I've flashed the kcs_kc868_a16_v2.2.18 firmware and it seems to be working. The board boots up and I can connect to it through the browser but I can't control it.
In the monitor tab there is the output section and I can click on ALL ON or ALL OFF and the squares go green or gray but the board doesn't do anything. The led indicators don't turn on and checking with a multimeter there isn't anything opening or closing.
I've tried shorting the digital inputs but that doesn't do anything either.
Link for the problem: https://youtube.com/shorts/ekwEwoERshc
Am I missing something? Do I need to set up anything else?
Thanks!