Hi,
I'm updating you on the situation with my m16v2:
- The LAN connection still isn't working. I'm only using the board via Wi-Fi. What a shame...
- The CT reading accuracy is "dirty." Even with the clamp disconnected, it can detect up to 0.3A.
- I modified the yaml file by inserting 16 entities to calculate power in W and 16 channels for energy calculation in kWh.
I then added a "filter" to prevent current readings below 0.3A from being calculated, as they would be false.
It's a shame because the board can't actually detect power below 50-60W with sufficient accuracy.
I'm updating you on the situation with my m16v2:
- The LAN connection still isn't working. I'm only using the board via Wi-Fi. What a shame...
- The CT reading accuracy is "dirty." Even with the clamp disconnected, it can detect up to 0.3A.
- I modified the yaml file by inserting 16 entities to calculate power in W and 16 channels for energy calculation in kWh.
I then added a "filter" to prevent current readings below 0.3A from being calculated, as they would be false.
It's a shame because the board can't actually detect power below 50-60W with sufficient accuracy.