Yesterday, 11:28 AM
(Yesterday, 11:18 AM)admin Wrote: you can download firmware BIN file directly to test.
https://www.kincony.com/forum/attachment.php?aid=9018
esptool --baud 921600 --before default-reset --after hard-reset write-flash -u --flash-mode dio --flash-freq 80m --flash-size 16MB 0x0 4-RS485-Test.ino.merged.bin
esptool v5.1.0
Connected to ESP32-S3 on /dev/ttyACM0:
Chip type: ESP32-S3 (QFN56) (revision v0.2)
Features: Wi-Fi, BT 5 (LE), Dual Core + LP Core, 240MHz, Embedded PSRAM 8MB (AP_3v3)
Crystal frequency: 40MHz
USB mode: USB-Serial/JTAG
MAC: 28:84:85:85:e0:c8
Stub flasher running.
Changing baud rate to 921600...
Changed.
Configuring flash size...
Flash will be erased from 0x00000000 to 0x003fffff...
Flash parameters set to 0x024f.
SHA digest in image updated.
Wrote 4194304 bytes at 0x00000000 in 21.9 seconds (1530.5 kbit/s).
Hash of data verified.
Hard resetting via RTS pin...