New DIY Project Support

[ahmed]

  logs_kc868-a16_upload (5).txt (Size: 18.52 KB / Downloads: 423)

don't understand your problem, video is better. your problem have solved before many are input wrong words, it really cost time, time is expensive! please do carefully. any home assistant questions also can check with home assistant community. you have almost asked 100 questions!

A16 installation has been redoing as last configuration, attached
  logs_kc868-a16_upload (5).txt (Size: 18.52 KB / Downloads: 423) the download log that is showing Error, appreciate to know the issue.

thanks

---

here is config.txt file in KC868-Server. you can replace for your file.
our work time is : 8:30AM -- 5:00PM in China, during these time, we can use anydesk help you.
because you replace file need change JUMPER and reboot, so do it by yourself is more easy. 

If you want to engage in smart home business for a long time, it is inevitable to learn basic knowledge.

Here are some steps how to update file to enable USB port of CM4.

1. change KC868-Server CM4 boot jumper to "ON"/RIGHT, see photo, connect USB-C cable with your computer.


2. power on of your KC868-Server, open program rpiboot in your windows OS.


3. in my PC will scaned new disk for CM4 eMMC driver. you will find out "config.txt"


4. you can add command line or just replaced with my config.txt file.

i repeat this step by replacing the config.txt to provide access again to server/ Raspberry Pi4 to USB port to move the desk but after replacing the config.txt file with your file still can't see the USB memory stick.