HAv2 ESPHome

[rhinoperth]

Hi Team,

I'm having trouble getting the external components working since the ESPHome changes.

I keep getting the below error when I try and compile. I have cleaned up all the build files etc and still no change.

Code:

INFO Unable to import component kc686_ha: No module named 'esphome.components.kc686_ha'
Failed config

kc686_ha: [source /config/esphome/device-191.yaml:72]
 
  Component not found: kc686_ha.

Below is my current config that won't compile.

Code:

esphome:
  name: device-191
  friendly_name: Switch - TR House Hub 1

esp32:
  variant: esp32
  framework:
    type: esp-idf

external_components:
  - source:
      type: git
      url: https://github.com/hzkincony/esphome-kc868-ha
      ref: v3.0.3

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "xxxxx"
  reboot_timeout:
    seconds: 120

ota:
  - platform: esphome
    password: "xxxxx"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  fast_connect: on
  manual_ip:
    static_ip: 172.16.5.191
    gateway: 172.16.5.1
    subnet: 255.255.255.0
    dns1: 172.16.5.1
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Device-191 Fallback Hotspot"
    password: "xxxxx"

captive_portal:

web_server:
  port: 80

uart:
  - id: rs485
    tx_pin: GPIO13
    rx_pin: GPIO16
    baud_rate: 9600


i2c:
  sda: GPIO4
  scl: GPIO5
  scan: True
  id: bus_a

pcf8574:
  - id: inputs_1_8
    address: 0x22
  - id: inputs_9_16
    address: 0x21
  - id: outputs_1_8
    address: 0x24
  - id: outputs_9_16
    address: 0x25

kc686_ha:

binary_sensor:



  ### RS485 ###

  ### Master Bed INT  ###
  - platform: kc868_ha
    target_relay_controller_addr: 1 # Default value is 1, corresponds to the Target Relay Controller Addr parameter in HA485_Ctrl software
    switch_adapter_addr: 11 # Default value is 10, corresponds to the Switch Adapter Addr parameter in HA485_Ctrl software
    bind_output: 1 # Corresponds to the BindOutput parameter in HA485_Ctrl software
    name: "Master Bed Internal Button 1"

  ### Master Bed EXT  ###
  - platform: kc868_ha
    target_relay_controller_addr: 1 # Default value is 1, corresponds to the Target Relay Controller Addr parameter in HA485_Ctrl software
    switch_adapter_addr: 12 # Default value is 10, corresponds to the Switch Adapter Addr parameter in HA485_Ctrl software
    bind_output: 7 # Corresponds to the BindOutput parameter in HA485_Ctrl software
    name: "Master Bed External Button 1"
  - platform: kc868_ha
    target_relay_controller_addr: 1 # Default value is 1, corresponds to the Target Relay Controller Addr parameter in HA485_Ctrl software
    switch_adapter_addr: 12 # Default value is 10, corresponds to the Switch Adapter Addr parameter in HA485_Ctrl software
    bind_output: 8 # Corresponds to the BindOutput parameter in HA485_Ctrl software
    name: "Master Bed External Button 2"

  ### Master WIR  ###
  - platform: kc868_ha
    target_relay_controller_addr: 1 # Default value is 1, corresponds to the Target Relay Controller Addr parameter in HA485_Ctrl software
    switch_adapter_addr: 13 # Default value is 10, corresponds to the Switch Adapter Addr parameter in HA485_Ctrl software
    bind_output: 13 # Corresponds to the BindOutput parameter in HA485_Ctrl software
    name: "Master WIR Button 1"

  ### Master Ensuite ###
  - platform: kc868_ha
    target_relay_controller_addr: 1 # Default value is 1, corresponds to the Target Relay Controller Addr parameter in HA485_Ctrl software
    switch_adapter_addr: 14 # Default value is 10, corresponds to the Switch Adapter Addr parameter in HA485_Ctrl software
    bind_output: 19 # Corresponds to the BindOutput parameter in HA485_Ctrl software
    name: "Master Ensuite Button 1"
  - platform: kc868_ha
    target_relay_controller_addr: 1 # Default value is 1, corresponds to the Target Relay Controller Addr parameter in HA485_Ctrl software
    switch_adapter_addr: 14 # Default value is 10, corresponds to the Switch Adapter Addr parameter in HA485_Ctrl software
    bind_output: 20 # Corresponds to the BindOutput parameter in HA485_Ctrl software
    name: "Master Ensuite Button 2"
  - platform: kc868_ha
    target_relay_controller_addr: 1 # Default value is 1, corresponds to the Target Relay Controller Addr parameter in HA485_Ctrl software
    switch_adapter_addr: 14 # Default value is 10, corresponds to the Switch Adapter Addr parameter in HA485_Ctrl software
    bind_output: 21 # Corresponds to the BindOutput parameter in HA485_Ctrl software
    name: "Master Ensuite Button 3"


switch:



  ### RS485 ###

  ### Master INT ###
  - platform: kc868_ha
    target_relay_controller_addr: 1
    switch_adapter_addr: 11
    bind_output: 1
    name: "Master Bed Internal Indicator 1"

  ### Master EXT ###
  - platform: kc868_ha
    target_relay_controller_addr: 1
    switch_adapter_addr: 12
    bind_output: 7
    name: "Master Bed External Indicator 1"

  - platform: kc868_ha
    target_relay_controller_addr: 1
    switch_adapter_addr: 12
    bind_output: 8
    name: "Master Bed External Indicator 2"

  ### Master WIR ###
  - platform: kc868_ha
    target_relay_controller_addr: 1
    switch_adapter_addr: 13
    bind_output: 13
    name: "Master WIR Indicator 1"

  ### Master Ens ###
  - platform: kc868_ha
    target_relay_controller_addr: 1
    switch_adapter_addr: 14
    bind_output: 19
    name: "Master Ensuite Indicator 1"

  - platform: kc868_ha
    target_relay_controller_addr: 1
    switch_adapter_addr: 14
    bind_output: 20
    name: "Master Ensuite Indicator 2"

  - platform: kc868_ha
    target_relay_controller_addr: 1
    switch_adapter_addr: 14
    bind_output: 21
    name: "Master Ensuite Indicator 3"

[admin]

kc686_ha:  should be  kc868_ha: