kc-868 AK

[Saif Kitany]

i have 2 old controlles, H32L and H32B.
i want to control them by KC-868 AK. 
so the H32B controller i set as TCP SERVER, both ethernet and wifi, AND in the kc-868 ak i enabled tcp client and put the ip adress of the controller and the port, and it works well.

now my question is : 

can i control the second controller H32L by UDP?

[Saif Kitany]

another queastion:

how can i control KC-868 AK by tuya?

i see some parameters to fill in the tuya ptotocol such as :
product id
device id
device secret
bind code

do theses parmeter i have to recive from you?

[admin]

1: H32L not support UDP command, only support tcp string command.
2: if you want H32L work with tuya, it's easy, just add kincony tuya adapter v2, here is video tour:
https://youtu.be/6jevfQFY9A0

[Saif Kitany]

I want to control kc-868 AK by tuya. How?

[admin]

not use tuya app control your KC868-AK, tuya adapter will let tuya app work with your H32L relay controller directly.

[Saif Kitany]

You didn’t understand my question!!!
In the kc-868 ak, theres is tuya option in protocol. How can i use it? Is there details i should have from kincony..???

[admin]

you need to buy tuya license: https://www.kincony.com/forum/showthread.php?tid=2544

[Saif Kitany]

Ok got it, i will buy.

Just for knowladge, does tuya adapter can work with Kincony A-series (ESP32) board connecting with RS485?

[admin]

tuya adapter v2 have RS485 port. But actually it can work by wifi , send to H32L by network, not need connect with any cable. only connect with 5V USB power.

[Saif Kitany]

No, I meant if the tuya adapter works with Kincony A-series (ESP32) board?