KinCony 0–10 V Analog Output Wiring Guide for LED and AC Dimming

[admin]

   

• 12 V LED driver → 12 V LED strip
  
• 24 V LED driver → 24 V LED strip
  
• AC dimmer with a 0–10 V input → Dimmable AC 220 V lamp
  

DAC/AO provides only the dimming signal. The load is powered by an external power supply and driver. For AC dimming, use a dedicated dimming SSR; a standard ON/OFF SSR is not suitable. Follow the driver’s manual for the exact terminal connections.