ESP32 chipset not working for rf module and led strip light from esphome

[homeassistant144]

RF module and led strip light gpios dont seem to be able to work together in this kc868 board. I tried for both seperately within esphome, once only using the RF and the next time only using the led code. No issues were seen until I tried to use them together. when i flash the esp32 with the code containing parts for both of these, flash shows to be successful but it doesn't come online in esphome. this is my yaml code i have been using in esphome.
  yaml code esphome.txt (Size: 3.3 KB / Downloads: 75)

[admin]

which board you are using? take a photo.

[homeassistant144]

I am using KC868 server with cm4 and home assistant installed on it

[admin]

next week , when have free time, we will test it.

[homeassistant144]

Ok please reply after the test regarding the issue

[admin]

ok

[homeassistant144]

Hello, have you guys tested regarding the issue? How can I use both RF module as well as the led gpios in the esp32 of this kc868 server simultaneously using esphome in homeassistant?