This is ESPHome configure for KC868-A4 smart home automation board. example for use output1-4 and input1-4 by GPIOs.
esphome:
name: kc868-a4
platform: ESP32
board: esp32dev
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
password: “4d5a388de4f759bf88e71cde7a31af6f”
wifi:
ssid: “KinCony”
password: “a12345678”
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: “Kc868-A4 Fallback Hotspot”
password: “QOU4hbAjJ5Wb”
captive_portal:
switch:
– platform: gpio
name: “light1”
pin: 2
inverted: false
– platform: gpio
name: “light2”
pin: 15
inverted: false
– platform: gpio
name: “light3”
pin: 5
inverted: false
– platform: gpio
name: “light4”
pin: 4
inverted: false
binary_sensor:
– platform: gpio
name: “input1”
pin:
number: 36
inverted: true
– platform: gpio
name: “input2”
pin:
number: 39
inverted: true
– platform: gpio
name: “input3”
pin:
number: 27
inverted: true
– platform: gpio
name: “input4”
pin:
number: 14
inverted: true
