This is ESPHome configure for KC868-Uair smart home automation box. example for use inside temperature sensor (DS18B20) and extend temperature sensor (SHT3x) and WS2812B RGB LED strip.
esphome:
name: kc868-uair
platform: ESP32
board: esp32dev
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
password: “978e66f878ed5041b830cfb427393c79”
wifi:
ssid: “KinCony” # your wifi router ssid
password: “12345678” # your wifi password
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: “Kc868-Uair Fallback Hotspot”
password: “FbTxCLlbDvbO”
captive_portal:
# follow configure use for DS18B20 temperature sensor, SHT30 temperature and humidity sensor. WS2812B RGB LEDs.
i2c:
sda: 4
scl: 16
scan: true
id: bus_a
# Example configuration entry
dallas:
– pin: GPIO27
update_interval: 15s
# Individual sensors
sensor:
– platform: dallas
address: 0xC000000004D81528 # your DS18B20 address
name: “internal Temperature”
# Example configuration entry
– platform: sht3xd
temperature:
name: “extend Temperature”
humidity:
name: “extend Humidity”
address: 0x44
update_interval: 15s
light:
– platform: fastled_clockless
chipset: WS2812B
pin: GPIO32 # Pin Define connected with LED strip
num_leds: 4 #LEDs number
rgb_order: GRB
name: “Uair-Bottom-LED”
effects:
– addressable_rainbow: ##defined 7 effects styles
– addressable_color_wipe:
– addressable_scan:
– addressable_twinkle:
– addressable_random_twinkle:
– addressable_fireworks:
– addressable_flicker:
– platform: fastled_clockless
chipset: WS2812B
pin: GPIO33 # Pin Define connected with LED strip
num_leds: 1 #LEDs number
rgb_order: RGB
name: “Uair-Vertical-LED”
effects:
– addressable_rainbow: ##defined 7 effects styles
– addressable_color_wipe:
– addressable_scan:
– addressable_twinkle:
– addressable_random_twinkle:
– addressable_fireworks:
– addressable_flicker:
