esphome:
  name: am

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

# Example configuration entry
api:

ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO17_OUT
  phy_addr: 0
  
  manual_ip:
    static_ip: 192.168.1.211
    gateway: 192.168.1.1
    subnet: 255.255.255.0

switch:
  - platform: gpio
    name: "am-light1"
    pin: 15
    inverted: False

sensor:
  - platform: dht
    pin: 33
    temperature:
      name: "Living Room Temperature"
    humidity:
      name: "Living Room Humidity"
    update_interval: 10s


  - platform: dallas
    dallas_id: hub_1
    address: 0xde0b23585c42fb28
    name: "Temperature #1"
  - platform: dallas
    dallas_id: hub_1
    address: 0xd20b2210b8edbd28
    name: "Temperature #2"
  - platform: dallas
    dallas_id: hub_3
    address: 0x690b2210c2ff4a28
    name: "Temperature #3"
  - platform: dallas
    dallas_id: hub_2
    address: 0x3f0b2210c07d1b28
    name: "Temperature #4"


dallas:
  - pin: 5
    id: hub_1
    update_interval: 10s
  - pin: 13
    id: hub_2
    update_interval: 20s
  - pin: 14
    id: hub_3
    update_interval: 30s