esphome:
  name: kinconymk
  friendly_name: kinconymk
  platformio_options:
    board_build.flash_mode: dio

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf

# Enable Home Assistant API
api:
  encryption:
    key: 

ota:
  - platform: esphome
    password:   

# Enable logging
logger:
  hardware_uart: USB_SERIAL_JTAG

ethernet:
  type: W5500
  clk_pin: GPIO43
  mosi_pin: GPIO44
  miso_pin: GPIO42
  cs_pin: GPIO41
#  interrupt_pin: GPIO2
  polling_interval: 10ms
  reset_pin: GPIO1

uart:
  - id: uart_485
    baud_rate: 9600
    debug:
      direction: BOTH
      dummy_receiver: true
      after:
        timeout: 10ms
    tx_pin: 16
    rx_pin: 15

web_server:
  port: 80
    
button:
  - platform: restart
    name: "Kinconymk Restart"

binary_sensor:
  - platform: status
    name: "Kinconymk Status"