+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: Home automation training courses (https://www.kincony.com/forum/forumdisplay.php?fid=18)
+--- Thread: Lesson9 - integrate KC868-Server to home assistant by MQTT (/showthread.php?tid=1781)
Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 03-27-2022
1．MQTT communication structure diagram
KC868-Server--------
publish message: status of switch (status topic)
Subscription message: turn on / off command (command topic)
home assistant------
publish message: turn on / off command (command topic)
Subscription message: status of switch (status topic)
2．KC868-Server digital output , digital input , analog input config sample code in configuration.yaml
# Example configuration.yaml entry
switch:
- platform: mqtt
name: 'output-1'
unique_id: output-1
state_topic: 'server/ xxxxxxxxxxxxxxxxxxxxxxxx /state'
command_topic: 'server/ xxxxxxxxxxxxxxxxxxxxxxxx /set'
payload_on: '{"relay1":{"on":1}}'
payload_off: '{"relay1":{"on":0}}'
value_template: '{{ value_json.relay1.on }}'
state_on: 1
state_off: 0
binary_sensor:
- platform: mqtt
name: 'input-1'
unique_id: input-1
state_topic: 'server/ xxxxxxxxxxxxxxxxxxxxxxxx /state'
value_template: '{{ value_json.input1.on }}'
payload_on: 1
payload_off: 0
sensor:
- platform: mqtt
name: 'analog-1'
unique_id: analog-1
state_topic: 'server/ xxxxxxxxxxxxxxxxxxxxxxxx /state'
unit_of_measurement: 'v'
value_template: '{{ value_json.analog1.value }} '
Note: xxxxxxxxxxxxxxxxxxxxxxxx is UID of controller, just replace with your device UID. You can find the UID in ethernet setting.
3．KC868-Server 16 channel output, 16 channel digital input, 4 channel analog input all use in configuration.yaml
KC868-Server-home-assistant-config.txt (Size: 8.15 KB / Downloads: 1,000)
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - Almhlws - 12-05-2022
I try to integrate KC868-Server to the home assistant by MQTT
but I can't find the IP for the server
the IP for the home assistant is http://192.168.100.172:8123/
see the photo
https://ibb.co/G2V4wQc
https://ibb.co/47cJmTn
https://ibb.co/rMMmr19
can you help me find the IP
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 12-05-2022
because your KC868-Server ip is 192.168.1.200
your network is 192.168.100.x
you should set KC868-Server ethernet for "DHCP" mode. let it's ip became 192.168.100.x so that you can find it.
how to set :
d.) Hold on Ethernet mode button, when the [yellow and white LED] all is ON, release it, then work mode in “UDP” and IP by DHCP mode;
here is online guide details: https://www.kincony.com/how-to-use-kc868-server.html
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - Almhlws - 12-06-2022
Than you Working now
I get error message
Your manually configured MQTT switch(s) needs attention
This stops working in version 2022.12.0. Please address before upgrading.
Manually configured MQTT switch(s) found under platform key
Code:
switchPlease move the configuration to the
Code:
mqttRE: Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 12-06-2022
yes, new home assistant version have changed mqtt format, you can see here:
https://www.kincony.com/forum/showthread.php?tid=1998
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - Almhlws - 12-08-2022
thank you
can you check attach
switch.txt (Size: 7.8 KB / Downloads: 319)
switch.txt (Size: 7.8 KB / Downloads: 319)
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 12-09-2022
yes, whether work well with your config file?
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - Almhlws - 12-09-2022
Not working
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 12-09-2022
which board you are using?
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - Almhlws - 12-09-2022
Kincony KC868-Server