+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5)
+--- Thread: KC868-Server V1.48 new firmware update (/showthread.php?tid=1836)
Pages:
1
2
KC868-Server V1.48 new firmware update - admin - 04-15-2022
improvement:
add manufactory test commands for RS232
command-1 for set to test mode:
set static IP:192.168.1.200 for ethernet
set wifi work mode=TCP Server
set ethernet work mode=TCP Server
enable 4 chanenl analog input auto report
set board RS485 address=1
set board RS485 Baud rate=9600bps
command-2 for Restore factory settings:
set wifi work mode=UDP
set ethernet work mode=UDP
disable 4 channel analog input auto report
KC868_SERVER_V148_220413.zip (Size: 54.15 KB / Downloads: 342)
download the ZIP file , unzip update the bin file for KC868-H32B relay controller by USB-RS232 cable or ethernet cable.
RE: KC868-Server V1.48 new firmware update - cris93ita - 05-06-2022
Hello.
i uploaded this firmware into the wifi TCP server page, but now it isn't work anymore... how can i reset it?
RE: KC868-Server V1.48 new firmware update - admin - 05-07-2022
no, you have mistake update for the wifi module, you should update use by KinCony's update tool. give me your email, we send you the wifi module firmware.
RE: KC868-Server V1.48 new firmware update - cris93ita - 05-07-2022
(05-07-2022, 12:08 AM)admin Wrote: no, you have mistake update for the wifi module, you should update use by KinCony's update tool. give me your email, we send you the wifi module firmware.
This is my email:
deitoscristian@me.com
I upload the wifi firmware in the same mode as i uploaded the h32b 4.44 firmware?
RE: KC868-Server V1.48 new firmware update - admin - 05-07-2022
this is how to update firmware: https://youtu.be/LLIJe9VTVq8
RE: KC868-Server V1.48 new firmware update - cris93ita - 05-07-2022
(05-07-2022, 08:42 AM)admin Wrote: this is how to update firmware: https://youtu.be/LLIJe9VTVq8
Ok, please can you send me the wifi firmware by email? Thank you a lot
RE: KC868-Server V1.48 new firmware update - admin - 05-07-2022
Monday when begin work , send to you.
RE: KC868-Server V1.48 new firmware update - cris93ita - 05-07-2022
(05-07-2022, 12:22 PM)admin Wrote: Monday when begin work , send to you.
I have found this.. i tried to upload it by your firmware download tool but it doesn't work
http://www.hi-flying.com/download-center-1/firmware-1/download-item-hf-lpx30-firmware
RE: KC868-Server V1.48 new firmware update - admin - 05-07-2022
can you find the AP "LPT230" , if you can find, just upload wifi module firmware as before.
Note:
wifi module firmware should upload by wifi module's tool (webpage)
controller's firmware upload by kincony's bootloader tool.
RE: KC868-Server V1.48 new firmware update - admin - 05-08-2022
(05-07-2022, 03:07 PM)cris93ita Wrote:(05-07-2022, 12:22 PM)admin Wrote: Monday when begin work , send to you.
I have found this.. i tried to upload it by your firmware download tool but it doesn't work
http://www.hi-flying.com/download-center-1/firmware-1/download-item-hf-lpx30-firmware
after you download the firmware package ZIP file, here have a file "HF-LPX30_Module_Upgrade and Debug_V1.4.pdf" , you can see here have details about download wifi module firmware.