+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16 (https://www.kincony.com/forum/forumdisplay.php?fid=25)
+--- Thread: Kincony A16 - PIR motion sensor (/showthread.php?tid=2484)
Pages:
1
2
RE: Kincony A16 - PIR motion sensor - sonalikaatc@gmail.com - 01-04-2023
Hi,
I have 3 wire sensor.. without NO and NC.
Can you tell me how to wire this sensor with digital input pin of A16.
It has
VCC
Gnd
output
How to wire this with A16??
RE: Kincony A16 - PIR motion sensor - admin - 01-04-2023
can you take a photo of your sensor pcb, you need to confirm your sensor power supply voltage.
usually Vcc is dc12v, connect 12v and GND to sensor, then sensor's "output" and GND connect to KC868-A16's digital input port and GND.
RE: Kincony A16 - PIR motion sensor - sonalikaatc@gmail.com - 01-07-2023
Hi
I have hcr501 pir sensor it works with 5 to 12 v dc..
I tried hard but output is stuck.
My wiring is correct as you mentioned above.
Can you please try this sensor with your a16 board and check it.??
Thanks.
RE: Kincony A16 - PIR motion sensor - admin - 01-07-2023
only hcr501 can't work?
if you short digital input port with GND, home assistant can detected? work well?
RE: Kincony A16 - PIR motion sensor - sonalikaatc@gmail.com - 01-07-2023
HI,
CAN YOU PLEASE SUGGEST SOME PIR MOTION SENSOR WHICH CAN WORK WITH A16 BOARD ??
please post some sensor name and link ?
thanks
RE: Kincony A16 - PIR motion sensor - admin - 01-07-2023
just use relay output signal is better, your PIR is use triode output, maybe have level compatibility issues.
here is our PIR sensor, can work for KC868-A16: https://www.aliexpress.us/item/2251832797755599.html?spm=a2g0o.store_pc_groupList.8148356.5.720b691ebtuuFO&pdp_npi=2%40dis%21USD%21US%20%2410.00%21US%20%2410.00%21%21%21%21%21%40213f990b16730784109375224e4a81%2166795498982%21sh&gatewayAdapt=glo2usa&_randl_shipto=US
RE: Kincony A16 - PIR motion sensor - sonalikaatc@gmail.com - 01-07-2023
Hi,
I have your pir motion sensor it has 5 wire
Red Black white blue and yellow
Which wire to connect with what ?
RE: Kincony A16 - PIR motion sensor - admin - 01-08-2023
https://www.kincony.com/how-to-use-pir-sensor.html
here is diagram. Because our PIR sensor have relay's "COM, NC,NO" output, you just need to use "COM" and "NO" is ok. output is WHITE and YELLOW.