+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: KC868-A16 home assistant demo configuration.yaml by MQTT (/showthread.php?tid=2571)
Pages:
1
2
RE: KC868-A16 home assistant demo configuration.yaml by MQTT - Brouk - 06-06-2024
the file is attached.
PS: While trying to configure the HomeAssistant connection to the A16 in configuration.yaml, I also saw this message:
The esphome integration does not support configuration using a YAML file. You may not notice any obvious integration issues, but any settings defined in the YAML won't actually be applied. To solve this:
1. If you haven't already done so, set up the integration.
2. Remove "esphome:" from the YAML settings file.
3. Restart Home Assistant.
RE: KC868-A16 home assistant demo configuration.yaml by MQTT - admin - 06-06-2024
this is configuration.yaml.
you need to intsall ESPHome addon on home assistant firstly.
then use this A16's yaml to create device in ESPHome, here is demo yaml file for A16: https://www.kincony.com/forum/showthread.php?tid=1628
RE: KC868-A16 home assistant demo configuration.yaml by MQTT - Brouk - 06-07-2024
The ESPHome addon has long been installed in HomeAssistant.
Thanks for the link to the contents of the YAML file for A16.
But I still don't know where this file should be saved? How to integrate?
...so far I haven't found a procedure that I can replicate on my H.A..
RE: KC868-A16 home assistant demo configuration.yaml by MQTT - admin - 06-08-2024
add whatsapp number: +86-15381188302
we use "ANYDESK" software remote control your computer to help you.