KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: Development (https://www.kincony.com/forum/forumdisplay.php?fid=4) +--- Thread: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second (/showthread.php?tid=2586) |
RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - admin - 02-22-2023 i have use Node-Red with H32B Pro , no any auto feedback. i think there is some home assistant entity always send query command to H32B Pro you have made, so H32B pro will auto feedback. i just only install the Node-Red , work without home assistant. RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - tekdara - 02-23-2023 1. Do you have any update from your testing? RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - admin - 02-23-2023 1. Do you see my feedback? no this problem, check your home assistant or Node-red other nodes, must have query for every 2 seconds. RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - tekdara - 02-23-2023 OK, i will re-install HA and node-red again. For clearly RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - admin - 02-23-2023 i think you can install only Node-Red for a test firstly. RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - tekdara - 02-24-2023 HI, i got the problem now. it stop after i disable esp32 Developer mode in relay setting. if i turn it on for homekit use, the debug message running. Why, How can we stop it event turn ON Esp32 Developer mode? RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - admin - 02-25-2023 you want to use Apple Homekit , but not want the feedback message to TCP ? RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - tekdara - 02-25-2023 yes, i want to use homekit but don't need feedback message. RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - admin - 02-25-2023 ok, we will check, then feedback to you. RE: KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second - admin - 02-27-2023 here is new firmware updated for KC868-H32B Pro for this problem. you can test it. H32B_Pro_V115_230226.zip (Size: 54.57 KB / Downloads: 137) |