+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A2 (https://www.kincony.com/forum/forumdisplay.php?fid=43)
+--- Thread: KC868-A2 configure yaml for ESPhome (/showthread.php?tid=2692)
Pages:
1
2
RE: KC868-A2 configure yaml for ESPhome - juan11perez - 09-29-2023
(09-27-2023, 06:52 AM)admin Wrote: if router not ready, esp32 will always try to connect with ethernet connection.
you can download KCS firmware for a test. just let esp32 board power on, then router power off, wait for a moment, router power on, then check esp32 whether is connected to router by ethernet.
Thank you. I would expect what you say to be the normal behaviour; nevertheless, it just doesn't do that with esphome.
It does, however, work with tasmota using this template. https://templates.blakadder.com/kincony_KC868-A2.html
Also, with esphome you can only use ethernet or wifi. With Tasmota both work without problem