+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: "KCS" v1.0.24 firmware BIN file download (/showthread.php?tid=2764)
RE: "KCS" v1.0.24 firmware BIN file download - admin - 04-18-2023
yes, in furture will add it.
RE: "KCS" v1.0.24 firmware BIN file download - cassiano - 04-22-2023
after flash my KCS_KC868- AK with KCS_KC868_AK_V1.0.24.zip, the KCS_KC868_AK has stopped communicating with the KC868-H32B-PRO via RS232 and RS485, now when I press the buttons on the KCS_KC868_AK, the relays are not activated on the KC868-H32B-PRO, how do I get it working again?
RE: "KCS" v1.0.24 firmware BIN file download - admin - 04-23-2023
yes, "KCS" is another firmware for KC868-AK.
if you want to use by H32B Pro , suggest use before firmware is better. here is download link:
kc868-ak-v1.0.7.zip (Size: 453.15 KB / Downloads: 248)
RE: "KCS" v1.0.24 firmware BIN file download - engmohades - 05-06-2023
(04-05-2023, 10:48 AM)admin Wrote: Here is "KCS" firmware for KinCony KC868-A series (ESP32) board.
How to download and use, online guide: https://www.kincony.com/kcs-firmware-esp32-board.html
v1.0.24 improment:
1. Fix some text in webpage.
2. Fix timer bug for different channel reset problem.
3. Let MQTT message feedback only one time, before will be twice.
4. Support RS485 MODBUS Button Adapter – KC868-HA
5. Fix bug of DAC output with tuya app problem.
what is suitable firmware for KC868-E16T ?
RE: "KCS" v1.0.24 firmware BIN file download - admin - 05-06-2023
you can download with E16S' , but after you download, your E16T tuya wifi module will not work.
RE: "KCS" v1.0.24 firmware BIN file download - vpuchkov - 05-14-2023
In manual says that OUTPUT delay time may be 1 - 255 x 100ms, but I need a 20 minutes delay. How can I implement this?
RE: "KCS" v1.0.24 firmware BIN file download - admin - 05-15-2023
if 20 minutes, go to "schedule" webpage, create "schedule" for it.
RE: "KCS" v1.0.24 firmware BIN file download - vpuchkov - 05-15-2023
I need to disable OUTPUT in 20min after disabling INPUT.
I tried schedule section, but I cant find any way to start time counting after disabling INPUT, or any other ways to use inputs as trigger for schedules.
Can you explain the solution with schedules?
RE: "KCS" v1.0.24 firmware BIN file download - admin - 05-16-2023
i am not understand your question, maybe you can draw a photo?
RE: "KCS" v1.0.24 firmware BIN file download - vpuchkov - 05-16-2023
For example:
If I single-click INPUT1, then OUTPUT1 turns on. After 20 minutes, OUTPUT1 should turn off automatically.