+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5)
+--- Thread: KC868-H32B V5.08 firmware (/showthread.php?tid=3323)
Pages:
1
2
RE: KC868-H32B V5.08 firmware - shipfinex1 - 07-01-2024
great post
RE: KC868-H32B V5.08 firmware - xray - 08-27-2024
Hi Admin,
Does the firmware upgrade reset the config to factory default or the configuration is preserved during FW upgrade?
Thanks.
RE: KC868-H32B V5.08 firmware - admin - 08-27-2024
after download firmware, the config will be clear. Need to set again.
RE: KC868-H32B V5.08 firmware - Sentenza - 02-10-2025
I'm completely new to this.
I recently purchased an H32B Pro relay controller and need to integrate it with a Raspberry Pi 5 and Home Assistant. My goal is to use the relays to control the lighting system of my small vertical farm on a timer.
I bought the H32B a month ago, but unfortunately, it came with an outdated firmware version: H32B_Pro_V1.19. I was expecting it to be updated before shipping, so this is quite disappointing. From what I’ve read here, it looks like I need firmware version 4 for proper integration.
The issue is that I only have Apple Macs in my office, and my only connection options are LAN via the modem or Wi-Fi.
I have no idea how to update the firmware, which version to download, or how to install it. Any guidance would be greatly appreciated!
Thanks in advance.
RE: KC868-H32B V5.08 firmware - admin - 02-10-2025
H32B_Pro_V1.19 already is newest firmware.
you are looking at H32B, NOT H32B Pro.
so your firmware can work with interlock mode is OK, you want "interlock" option with your motor.