+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-M16 / M1 / MB / M30 (https://www.kincony.com/forum/forumdisplay.php?fid=50)
+--- Thread: Reading fluctuates (/showthread.php?tid=3546)
Pages:
1
2
RE: Reading fluctuates - admin - 12-12-2023
if you no load ON, showed 15-18w, i think you need add these lines for "filters":
- platform: ct_clamp
sensor: ai1
id: Measured_Current_1
name: "Measured Current-1"
update_interval: 5s
filters:
- calibrate_linear:
- 0.0034 -> 0
- 0.31749 -> 8.95608
RE: Reading fluctuates - Marcinek40 - 12-12-2023
Ok, it works.
And where did you get this value 0.034???? how to calculate it
RE: Reading fluctuates - admin - 12-12-2023
when you load turn off, check the RAW code in esphome log output, it showed 0.0034