+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16 (https://www.kincony.com/forum/forumdisplay.php?fid=25)
+--- Thread: PWM support? (/showthread.php?tid=6749)
Pages:
1
2
RE: PWM support? - luis15pt - 09-25-2024
(09-22-2024, 11:36 PM)admin Wrote: KCS not support PWM output. you can try to use by ESPHome.
Update to this thread got it working in ESPHome with the following config:
Code:
# PWM output for fan control
output:
- platform: ledc
pin: GPIO14
id: fan_output
frequency: 25000Hz
min_power: 0.0
max_power: 1.0
fan:
- platform: speed
output: fan_output
name: "PWM Fan"
id: pwm_fan
speed_count: 100
sensor:
- platform: pulse_counter
pin:
number: GPIO32
mode:
input: true
pullup: true
name: "Fan RPM"
id: fan_rpm
unit_of_measurement: "RPM"
filters:
- multiply: 0.5
- lambda: return round(x); # Round to nearest whole number
accuracy_decimals: 0 # Display no decimal places
update_interval: 3s
count_mode:
rising_edge: INCREMENT
falling_edge: DISABLE
- platform: template
name: "Fan Speed Percentage"
id: fan_speed_percentage
unit_of_measurement: "%"
accuracy_decimals: 0
lambda: |-
return (id(fan_rpm).state / 6600.0) * 100.0;
update_interval: 3sRE: PWM support? - admin - 09-25-2024
good.