+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: Development (https://www.kincony.com/forum/forumdisplay.php?fid=4)
+--- Thread: KBOX-Pad for Windows PC or Windows Tablet 10 inch (/showthread.php?tid=72)
Pages:
1
2
RE: KBOX-Pad for Windows PC or Windows Tablet 10 inch - James Alabama - 10-08-2021
(10-08-2021, 01:22 AM)admin Wrote: Yes, KBOX-pad application have fixed by "V" unit. because it display the voltage of the analog input port. what do you want to change?
I have set the "analog variation" (in parameters) to 0.01
"Temperature variation" also set at 0.01
Col_Connect OK!
Digital inputs work correctly. (on KBox-Pad)
Controller outputs work correctly (on KBox-Pad)
However, I cannot get any reading for analog inputs or temperature inputs (18B20) - all show 0 value.
What am I missing?
RE: KBOX-Pad for Windows PC or Windows Tablet 10 inch - admin - 10-09-2021
check ds18b20 temperature wire whether good contact and try to change the temperature value, it will update.
RE: KBOX-Pad for Windows PC or Windows Tablet 10 inch - James Alabama - 10-09-2021
I changed temperature values on DS18B20 and RTD temperature elements but still on display on KBOX-Pad. Values show fine on Kincony_SCB display
James
Sorry "still NO display"...
RE: KBOX-Pad for Windows PC or Windows Tablet 10 inch - admin - 10-09-2021
we will check later.
RE: KBOX-Pad for Windows PC or Windows Tablet 10 inch - James Alabama - 10-18-2021
I downloaded latest firmware V1.9 (was on using V1.8) for ColB and this took care of problem.
Thank you.
RE: KBOX-Pad for Windows PC or Windows Tablet 10 inch - admin - 10-18-2021
ok