Smart Home Automation Forum
N60 Sensor channel label - Printable Version

+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=87)
+--- Forum: N60 (https://www.kincony.com/forum/forumdisplay.php?fid=88)
+--- Thread: N60 Sensor channel label (/showthread.php?tid=9236)

Pages: 1 2

RE: N60 Sensor channel label - marekd1 - 04-19-2026

(04-19-2026, 04:05 AM)admin Wrote: 1: about "power factor" we will check and later feedback to you.
2: here is new KCS firmware, support rename for every channel and update to home assistant by mqtt auto discovery.
just double click the channel name, you can rename by yourself.

firmware BIN file download:

Thank you!!

RE: N60 Sensor channel label - admin - 04-20-2026

1: the "power factor" according to channel1. BL0910 chip only have one channel power factor, can't monitor 10 channels.

RE: N60 Sensor channel label - marekd1 - 04-20-2026

(04-20-2026, 12:09 AM)admin Wrote: 1: the "power factor" according to channel1. BL0910 chip only have one channel power factor, can't monitor 10 channels.

Ok, thank you for checking.

Can you tell me if there is a procedure to properly calibrate  the measurements on each of the channels?

RE: N60 Sensor channel label - admin - 04-20-2026

use PC software for that:
[Image: attachment.php?aid=9284]
pc software download link: https://www.kincony.com/forum/showthread.php?tid=8406

RE: N60 Sensor channel label - marekd1 - 04-20-2026

(04-20-2026, 02:26 AM)admin Wrote: use PC software for that:
[Image: attachment.php?aid=9284]
pc software download link: https://www.kincony.com/forum/showthread.php?tid=8406

Great, Thank you!

RE: N60 Sensor channel label - admin - 05-16-2026

here is N60 new firmware, support DST now, you can test it, whether is you wanted.

.zip   KCS_N60_V3.25.0_beta_20260515-142317.zip (Size: 1.04 MB / Downloads: 168)

RE: N60 Sensor channel label - marekd1 - 08-13-2026

(04-19-2026, 04:05 AM)admin Wrote: 1: about "power factor" we will check and later feedback to you.
2: here is new KCS firmware, support rename for every channel and update to home assistant by mqtt auto discovery.
just double click the channel name, you can rename by yourself.

firmware BIN file download:

Thank you for marking changes to allow for the custom Channel name feature.  I do have one more ask however.  Would it be possible to allow longer names (more characters) right now I believe allowed number of characters is 16.  I believe 32 characters should be sufficient.

Thank you in advance.

RE: N60 Sensor channel label - admin - 08-14-2026

we will check, maybe in future, next update.

RE: N60 Sensor channel label - marekd1 - 08-14-2026

(08-14-2026, 01:50 AM)admin Wrote: we will check, maybe in future, next update.

Thank you!